Precision Tool Design Revision
Краткое
Freelancer Client is hiring: Precision Tool Design Revision.
Location: Remote
Here is the checklist of tool changes gathered from your project notes. It breaks down the modifications by the specific component and outlines the exact order of operations the freelancer needs to follow to avoid throwing off the calibration scales.
What you'll do:
• Quick-Release Slot: Add a new, open-ended quick-release slot to the design.
Requirements:
• Pivot Notches: Resize the pivot notches to improve degree-tracking accuracy during mechanical movement.
• Resize pivot notches for high-accuracy degree tracking.
Skills: CAD/CAM, 3D Rendering, Mechanical Engineering, Product Design, 3D Modelling, 3D Design, 3D Printing, 3D CAD
Budget: $250–$750 USD
Source: Freelancer Client via Remote / Online. Apply on the source website.
Оригинал
Here is the checklist of tool changes gathered from your project notes. It breaks down the modifications by the specific component and outlines the exact order of operations the freelancer needs to follow to avoid throwing off the calibration scales.
Loose Cannon Tool Revision Checklist
1. Main Square Modifications
Mirror Markings:** Mirror all front-facing layout markings onto the back side of the tool for dual-sided use.
Pivot Notches:** Resize the pivot notches to improve degree-tracking accuracy during mechanical movement.
Branding:** Optimize the placement and clearance for the "Hidden Valley" branding engraving.
2. Slider Modifications
Dado Slot Adjustment:** Modify the dado slot width and depth to provide proper clearance for the hardware.
Quick-Release Slot:** Add a new, open-ended quick-release slot to the design.
Extension Limit: Constrain the maximum extension of the slider to exactly 1.25 inches** past the main body.
Scale Alignment:** Realign and calibrate the indexing scales to match the new physical travel.
3. Assembly Verification
Angle Verification:** Verify and double-check all layout angles originating from the slider pivot points.
Reference Mark:** Add a permanent reference mark to the assembly for taking blind-spot measurements.
Critical Order of Operations (For the Freelancer)
To ensure the math on the scales stays accurate, make sure the engineer handles the tasks in this specific order:
1. Finalize Hardware Fit: Complete all dado slot and hardware clearance adjustments first.
2. Determine Max Extension: Lock in the 1.25-inch maximum extension constraint.
3. Shorten the Slider: Physically modify/shorten the slider component in CAD based on the extension and hardware parameters.
4. Calibrate Measurement Scales: Once the physical geometry is locked, lay down and calibrate the laser-etched measurement scales last.
Ready-to-Paste Text for the Freelancer:
```text
ENGINEERING CHECKLIST & ORDER OF OPERATIONS:
Please execute the following CAD updates in this specific order to preserve scale calibration:
1. HARDWARE FIT: Adjust the slider's dado slot for proper hardware clearance.
2. EXTENSION LIMIT: Constrain the slider's maximum extension to exactly 1.25" past the main body.
3. SLIDER GEOMETRY: Shorten the slider component accordingly and add an open-ended quick-release slot.
4. CALIBRATE SCALES:
- Realign the indexing scales based on the new travel limits.
- Mirror all layout markings onto the back side of the main square.
- Resize pivot notches for high-accuracy degree tracking.
- Add a permanent reference mark for blind-spot measurements.
5. QC: Verify all layout angles originating from the slider pivot points and optimize "Hidden Valley" branding placement.
```
Локация & Details
Перейти к источнику →About this listing
This remote opportunity was imported from Freelancer and is shown here for discovery. To apply, follow the link to the original posting.